How to paste toilet tiles

How to paste toilet tiles? It seems that there is only one way to paste ceramic tiles. In fact, this is not the case. Generally, there are many ways to paste ceramic tiles in the bathroom. Through different ways and combinations of various ways, the ceramic tiles in the bathroom become more fashionable. So, how to paste toilet tiles? Let's have a look

how to paste toilet tiles? It seems that there is only one way to paste ceramic tiles. In fact, this is not the case. Generally, there are many ways to paste ceramic tiles in the bathroom. Through different ways and combinations of various ways, the ceramic tiles in the bathroom become more fashionable. So, how to paste toilet tiles? Let's have a look

how to paste toilet tiles

how to paste toilet tiles

1. Avoid excessive water absorption of tiles

how to paste toilet tiles

when purchasing tiles, you need to focus on checking the water absorption of tiles. Drop water on the back of the tile to see how fast the water will soak after dispersing& mdash; Generally speaking, the slower the water absorption, the greater the density of the tile

2. Avoid too shallow lines on the back of tiles

how to paste bathroom tiles

tiles in order to fit closely with the wall, lines are generally designed on the back. When the lines are deep, it can ensure that the tiles will not fall off when they are partially separated from the cement mortar layer

3. Sand is the best choice

how to paste toilet tiles

the thicker the sand, the higher the strength of the prepared cement mortar. However, if the strength is too high, it will also lead to some bad results, such as cracks in the ground leveled with it

4. The base course for laying tiles needs to be handled well

how to paste tiles in the bathroom

in order to avoid hollowing of tiles, first of all, the wall surface and ground base course paved with tiles must be cleaned. Be sure to remove all kinds of dirt on the wall, and wet the base with water one day in advance to control the humidity at 30-70%

5. Cement mortar should be full and uniform

how to paste toilet tiles

when the prepared cement mortar scraper is used on the back of the tiles, it should be noted that the cement mortar should be full and uniform, and there should be no cutting corners

6. Reserve enough expansion joints

how to paste toilet tiles

when laying tiles, 2-5mm expansion joints should be reserved. If there are not enough expansion joints, under the action of thermal shock expansion or moisture expansion, adjacent tiles may be squeezed by stress, resulting in hollowing and falling off

the above brief introduction about how to paste toilet tiles is here. I hope it will be helpful to you. Please look forward to more information

佛山皮肤病医院

济南皮肤病医院

贵阳风湿医院